POWERSPEDAL “POWERSVOLA - Voodoo Lady“ (Fuzz Guitar Effect Pedal)

The “POWERSVOLA - Voodoo Lady” - The only version Jimi Hendrix would have ever played!

The very dirty fuzz sound and iconic octave-up effect of this pedal is a must-have for guitarists seeking that legendary tone. This effect pedal delivers the unmistakable and iconic sound defined by Jimi Hendrix and Stevie Ray Vaughan. With this pedal, you too can create the raw, powerful sounds that have shaped rock history.

Featuring two switches - one foot switch for on/off bypass and one toggle switch for disables the octave for a more traditional fuzz effect, this pedal offers versatility at your feet.

The “POWERSVOLA - Voodoo Lady” stands apart for its unique circuit!

This special design, using a transformer to create the iconic octave-up effect, is the same type of circuit that Jimi Hendrix exclusively played throughout his career and making it synonymous with his legendary sound. Unlike later transistor versions, this circuit retains the raw, gritty character that defined Hendrix's tone.

Adorned with psychedelic artwork, this pedal is a visual and sonic celebration of the ‘60s.

Key Features:
- Controls: VOLUME and FUZZ, Octave-Up effect
- True-bypass switch
- Status LED
- Handcrafted
- Unique serial number

Specifications:
Power supply (not included): 9V DC
Input: 1/4" // 6.35mm TS (mono) jack
Output: 1/4" // 6.35mm TS (mono) jack
Dimensions (case): 4.75in x 2.61in x 1.42in // 121mm x 66mm x 36mm
Weight: 9.8oz // 280g

Box content:
- The "POWERSVOLA - Voodoo Lady” guitar effect pedal

Designed and handwired with ❤️ in the California and England.

Order yours today and experience the difference it can make in your audio setup!

Check out this great guitar effect pedals too

• ➡️ POWERSPEDAL “POWERSMIRA - Mighty Rats”

• ➡️ POWERSPEDAL “POWERSVICJ - Vicious Joker“

• ➡️ POWERSPEDAL “POWERSNABO - Nasty Bomb”

• ➡️ POWERSPEDAL "THE SUCKER!" - Dying Battery Simulator

If you have any questions, please drop me a message!

POWERSPEDAL “POWERSMIRA - Mighty Rats“ (Distortion Guitar Effect Pedal)

The “POWERSMIRA - Mighty Rats” effect pedal is the ultimate tribute to 40+ years of RAT evolution and its impact on guitar’s sound.

This pedal is more than just a distortion box, it is the secret weapon for real musicians who think of 60's garage rock, early punk or simply the bands that changed the sound of rock 'n' roll. Artists from every genre have used this iconic and unassuming black box to create their tones, including the Eagles, Jeff Beck, Nirvana, Metallica, Pink Floyd, REM and Radiohead.

The POWERSMIRA - Mighty Rats offers intuitive control over the core aspects of your tone

The DISTORT. knob adjusts the gain or the amount of distortion applied to your signal. Turning it up increases the saturation, producing more aggressive, overdriven tones, while lowering it gives a cleaner, less distorted sound. The VOLUME knob controls the overall output of the pedal, allowing you to adjust the loudness to match your desired level without affecting the tone. The FILTER knob acting as a low-pass filter, this control allows you to shape the tonal brightness of the effect. Depending on the position, more high frequencies are let through, which brightens the sound, or higher frequencies are attenuated, which results in a darker sound.

The simplicity of these controls makes the PackRat easy to dial in for a wide range of awesome distortion tones.

The toggle switch toggles between the ANGRY and FAT versions. As you change the mode, the analog circuitry is rewired between different values of resistors, capacitors, diodes, and op-amps.

The POWERSMIRA - Mighty Rats modes

• ANGRY

  The ANGRY mode highlights its key characteristics, emphasizing hard-clipping, scooped mid-range frequencies and a brighter tone, so you’ll have no trouble being heard through the mix. Since the circuit was designed around the musical distortion, it retains these qualities without sounding harsh.

• FAT

  The FAT mode use of germanium clipping diodes is indeed a key factor in producing its signature tone. These diodes give it a warmer, more vintage sound that balances well between the aggression of distortion and the richness of fuzz. It's an iconic choice for guitarists who appreciate both tonal clarity and warmth.

Key Features:
- Controls: DISTORTION, VOLUME and FILTER
- Switch for ANGRY and FAT mode
- True-bypass switch
- Status LED
- Handcrafted
- Unique serial number

Specifications:
Power supply (not included): 9V DC
Input: 1/4" // 6.35mm TS (mono) jack
Output: 1/4" // 6.35mm TS (mono) jack
Dimensions (case): 4.75in x 2.61in x 1.42in // 121mm x 66mm x 36mm
Weight: 9.6oz // 271g

Box content:
- The "POWERSMIRA - Mighty Rats” guitar effect pedal

Designed and handwired with ❤️ in the California and England.

Order yours today and experience the difference it can make in your audio setup!

Check out this great guitar effect pedals too

• ➡️ POWERSPEDAL “POWERSVOLA - Voodoo Lady”

• ➡️ POWERSPEDAL “POWERSVICJ - Vicious Joker“

• ➡️ POWERSPEDAL “POWERSNABO - Nasty Bomb”

• ➡️ POWERSPEDAL "THE SUCKER!" - Dying Battery Simulator

If you have any questions, please drop me a message!

POWERSPEDAL “POWERSVICJ - Vicious Joker“ (Overdrive Guitar Effect Pedal)

The “POWERSVICJ - Vicious Joker” - Channel your inner Tony Iommi with this awesome overdrive effect pedal.

"POWERSVICJ - Vicious Joker”, a guitar pedal effect (from the POWERSPEDAL series) meticulously crafted by myself, delivering a sound that channels the power and mystique of classic British metal. Inspired by the legendary raw power of vintage Black Sabbath tones.

The “POWERSVICJ - Vicious Joker” is like no other!

Designed around the classic Rangemaster circuit, coupled with a Laney Preamp voiced together, with the end result being this beastly effect pedal and features four controls: PRESENCE, GAIN, PRESENCE, VOL. and RANGE.

These controls let you dial in your desired tone, from the treble-boosted rawness of the Rangemaster to the full-range roar of the Laney Supergroup. One of the standout features of this pedal is the RANGE control, which allows you to modulate the treble-boost section of the circuit and achieve a continuously variable frequency respo

Key Features:
- Controls: PRESENCE, GAIN, VOL. and RANGE (allows for continuously variable frequency response)
- True-bypass switch
- Status LED
- Handcrafted
- Unique serial number

Specifications:
Power supply (not included): 9V DC
Input: 1/4" // 6.35mm TS (mono) jack
Output: 1/4" // 6.35mm TS (mono) jack
Dimensions (case): 4.75in x 2.61in x 1.42in // 121mm x 66mm x 36mm
Weight: 9.9oz // 283g

Box content:
- The "POWERSVICJ - Vicious Joker” guitar effect pedal

Designed and handwired with ❤️ in the California and England.

Order yours today and experience the difference it can make in your audio setup!

Check out this great guitar effect pedals too

• ➡️ POWERSPEDAL “POWERSVOLA - Voodoo Lady”

• ➡️ POWERSPEDAL “POWERSMIRA - Mighty Rats”

• ➡️ POWERSPEDAL “POWERSNABO - Nasty Bomb”

• ➡️ POWERSPEDAL "THE SUCKER!" - Dying Battery Simulator

If you have any questions, please drop me a message!

POWERSPEDAL "THE SUCKER!" - Dying Battery Simulator

The POWERSPEDAL “THE SUCKER!” emulates the effect of a dying 9V battery on guitar effect pedals.

My dying battery simulator pedal is the perfect solution for guitarists, who love the sound of their analog guitar effect pedals as the power of the battery starts to sag.

For example, many fuzzes sound better when the battery is empty and no longer supplies 9V. With THE SUCKER! you can easily do this all the time! Maybe it sounds a bit crazy, but it can sound pretty damn cool!

One of the biggest challenges in achieving the perfect “dying battery sound” is the lack of consistency. With THE SUCKER! you can dial in that perfect sound with precision every time. You also won't have to wait until your battery gets low to achieve those sought-after sounds. Simply plug your guitar effect pedal into THE SUCKER! and you're ready to go - and even with the power supply unit that you have been using for the power supply of your effect pedals.

With the big knob, you can have precise control over the voltage of the plugged-in effect pedal and achieve the perfect sound for your needs. The digital voltage meter display, can easily monitor the power supply of your effect pedal and you can see exactly what voltage is perfect for effect pedal and your individual sound.

Please note: The dying battery simulator is intended only to be used with analog pedals. Digital pedals typically require more power and don’t generally function properly on lower power. They may even be damaged by being used with lower power.

THE SUCKER! works with standard “BOSS style” center-negative (2.1mm x 5.5mm) power supplies and include a male-to-male power patch cable to connect your effect pedal.

Specifications:
Power supply: 9V DC
Power output: Range of approximately 2 to 9 volts
Dimensions (case): 3.65in x 1.52in x 1.22in // 93mm x 39mm x 31mm
Weight: 5.0oz // 142g

Box content:
- The POWERSPEDAL “THE SUCKER!”
- Male-to-Male power patch cable (2.1mm x 5.5mm, center-negative)

Designed and handwired with ❤️ in the California and England.

Order yours today and experience the difference it can make in your audio setup!

Check out this great guitar effect pedals too

• ➡️ POWERSPEDAL “POWERSVOLA - Voodoo Lady”

• ➡️ POWERSPEDAL “POWERSMIRA - Mighty Rats”

• ➡️ POWERSPEDAL “POWERSVICJ - Vicious Joker“

• ➡️ POWERSPEDAL “POWERSNABO - Nasty Bomb”

If you have any questions, please drop me a message!

POWERSPEDAL “POWERSNABO - Nasty Bomb” (Overdrive Guitar Effect Pedal)

The “POWERSNABO - Nasty Bomb” - An absolute recommendation if fat, rocking riffs are your thing and if you love to having a great time with your guitar.

"POWERSNABO - Nasty Bomb", a guitar pedal effect (from the POWERSPEDAL series) meticulously crafted by Andrew B. Powers, is an overdrive that takes tonal excellence to the next level, which rather boldly claims to beat all the others! Sonically most overdrives can sound thin or lack a "certain something” - This is where the "POWERSNABO - Nasty Bomb" comes in. This allows you to hit the sound of an amplifier that is about to explode.

The sounds produced are not only inspiring, they are extremely addictive!

The heart of this awesome effect pedal is a special "engine" inside, cascading that tone filled gain from input to output and tuned to deliver maximum tonality for as wide a range of amps as possible.

With effective knob twiddling you will achieve overdrive tonal perfection, from subtle through to searing, think slightly hairy blues to hard rock.

The first three controls VOLUME, GAIN and TONE are self-explanatory. Meanwhile, a fourth control, CALIBER, sets the level of a secondary overdrive stage that cascades with the first drive section. With effective knob twiddling you will achieve tonal perfection.

Like a tube amp, the "POWERSNABO - Nasty Bomb" is responsive to your guitar’s controls and the sensational responsiveness of this effect pedal makes using the Volume and Tone knobs to add and remove distortion particularly rewarding.

Key Features:
- Controls: VOLUME, GAIN, TONE, CALIBER
- True-bypass switch
- Status LED
- Built to withstand the rigors of live performance
- Handcrafted
- Unique serial number

Specifications:
Power supply (not included): 9V DC
Input: 1/4" // 6.35mm TS (mono) jack
Output: 1/4" // 6.35mm TS (mono) jack
Dimensions (case): 4.75in x 2.61in x 1.42in // 121mm x 66mm x 36mm
Weight: 9.67oz // 274g

Box content:
- The “POWERSNABO - Nasty Bomb” guitar effect pedal

Designed and handwired with ❤️ in the California and England.

Order yours today and experience the difference it can make in your audio setup!

Check out this great guitar effect pedals too

• ➡️ POWERSPEDAL “POWERSVOLA - Voodoo Lady”

• ➡️ POWERSPEDAL “POWERSMIRA - Mighty Rats”

• ➡️ POWERSPEDAL “POWERSVICJ - Vicious Joker“

• ➡️ POWERSPEDAL "THE SUCKER!" - Dying Battery Simulator

If you have any questions, please drop me a message!

POWERSSUMO - MIDI Sustain & Modulation Pedal

This pedal is designed to work with any MIDI keyboards, that don't have a dedicated 6.3 jack.

If you're a keyboard player, you know how important sustain and modulation pedals can be to create the right sound and expression in your playing. However, not all MIDI keyboards come with a 6.3 jack to connect one. That's where the POWERSSUMO - MIDI Sustain & Modulation Pedal comes in.

This pedal is designed to work with almost any keyboards. It connects to your keyboard through the MIDI port and provides sustain or modulation capabilities.

Introducing this versatile and dynamic MIDI sustain and modulation pedal - a game-changer for any keyboardist. Because this pedal provides two effects in one. When one of its modes is switched on and active, the built-in LED indicates this with a short flashing sequence of 5 times. With the switch in the "S" position, the pedal provides a realistic and precise sustain effect that allows you to control the length of your notes with ease. And with the switch in the "M" position, the pedal provides a dynamic modulation effect that adds depth and expression to your playing. With the built-in LED that turns on when the foot switch is pushed, you'll always know when the effect is engaged.

The original Hammond enclosure has the great typical ANDREW B. POWERS design and is made from high-quality diecast aluminum with a metallic finish. Therefore that can withstand the rigors of regular use. Rubber feet guarantee a stable and secure standing position. The design is very sleek and compact, making it easy to transport and use in a variety of settings. It’s the smallest pedal available on the market.

In summary, the POWERSSUMO - MIDI Sustain & Modulation Pedal is a must-have accessory for any keyboardist looking to add greater control, expression, and versatility to their playing.

Specifications:
Output: MIDI-USB-B-Buchse, MIDI DIN (5V)
Power supply: 9V Battery
Current consumption: 8mA
Quiescent current: 2mA
Dimensions (case): 3.65in x 1.52in x 1.22in // 93mm x 39mm x 31mm
Weight: 5.75oz // 163g

Box content:
- The famous POWERSSUMO - MIDI Sustain & Modulation Pedal

Designed and handwired with ❤️ in the California and England.

Order yours today and experience the difference it can make in your audio setup!

If you have any questions, please drop me a message!

POWERSRECCAB - Design Record Cabinet

The POWERSRACK is beautiful uniquely handmade design cabinet for vinyl records, Hi-Fi equipment and books

Indulge your passion for music with the POWERSRECCAB. Handcrafted with meticulous attention to detail, this exceptional record cabinet offers a stylish and practical solution for storing your beloved vinyl collection.

The sturdiness of solid multiplex beech panels ensure that each of the four compartments has been ingeniously crafted to accommodate approximately 52-64 records (album, 33 rpm) along with their covers. This means that records with a total weight of up to 204 lbs. (92.4kg) can be loaded.

Except for the wood of the top, everything was stained was staining with a mid walnut color and coated with five layers of the finest shellac. So the surfaces look fantastic.

What truly sets this record cabinet apart is the table top, which have been artfully repurposed from reclaimed wood boards and beams. These reclaimed wood have lived lifetimes as part of industrial businesses, construction companies and old houses, including wood washed up on shores. After extensive cleaning and sanding, several coats of Danish Oil were applied to seal and finish the beautiful wood surface of the table top. As a result, a satin matte finish is created that is hard, durable and incredibly attractive. Please note: Table top plate which can be seen in these photos is made of wood from a burnt down house.

To protect the covers of the records when removing and loading into the cabinet, the bottoms of the compartments are lined with soft but durable felt.

Designed with both style and functionality in mind, the classic hairpin legs lend a modern flair to the cabinet, beautifully complementing any décor. The steel legs are sealed with a special rust preventing coat, few natural rust spots may appears, this gives a great and more aged industrial feel.

Included in the scope of delivery are rubber tips for the ends of the hairpin legs. The rubber tips help keep the furniture from shifting or gliding on bare floors while offering protection from scratches to the floor.

Record sideboards are designed with enough space to store Hi-Fi and power cables on the back. As a result, the POWERSRECCAB can be placed very close to any wall.

Whether it graces your living room, music corner, entertainment area, music studio or record store, this cabinet becomes the centerpiece that sparks conversations and leaves a lasting impression on your guests.

The POWERSRECCAB are 55.11in/140.0cm wide, 15.75”/40.0cm deep (depth of compartments 13.19in/33.5cm) and 29.5in/75.0cm high (length of the legs 14.17in/36.0cm). Available in color of walnut (“WEST HOLLYWOOD”). This studio rack is available in UK, USA, Canada, Europe and Australia.

Designed and manufactured with ❤️ in the California and England.

Order yours today and experience the difference it can make in your audio setup!

If you have any questions, please drop me a message!

POWERSYAP - Headphone Amplifier

The POWERSYAP is the perfect solution for your audio problems.

The POWERSYAP is a pretty awesome headphone amp. Whether you're performing live, recording in the studio or want to practice your guitar playing without disturbing others or need a compact solution while traveling. This headphone amp is the perfect tool for any musician.

This headphone amp is versatile and can be used with a line-level mono output, like the monitor output from any mixing console, to power your headphones or in-ear monitors. It can also be used in the studio from a headphone output to give your artists volume control. Additionally, you can plug the headphone amp into those unused line outputs on the back of your interface to provide more headphone mixes for everyone in the studio.

If you own high-end headphones, this amplifier can also be a good investment to improve your listening experience. Because this kind of headphones have a High-impedance and require more power to drive to a reasonable volume. Using the POWERSYAP headphone amp with high-end headphones can result in improved sound quality, including better dynamics, clarity and detail in the audio.

You can plug in either a stereo TRS or a mono TS quarter inch cable to the YAP amp, and you can easily toggle between a mono or stereo input with the M/OFF/S switch on the back side. The LED indicates the active mode and whether the input signal is being processed as a incoming mono or stereo signal. The headphone amp is built with high-quality and reliable jack connectors from Neutrik. The original Hammond enclosure has the great typical ANDREW B. POWERS design and is made from high-quality diecast aluminum with a powder-coated smooth green finish.

The POWERSYAP is powered by an external 9-volt BOSS-style DC power supply, but it can also be powered by a 9-volt battery (battery clip included). This makes it perfect for situations where an external power supply is not available.

In summary, the POWERYAP headphone amplifier is a reliable and versatile device that will help you solve your audio problems and improve your guitar playing experience.

Specifications:
Input: 1/4" // 6.35mm TS/TRS (switchable mono/stereo) jack
Output: 1/4" // 6.35mm TRS stereo jack
Power supply: DC 9V
Quiescent current: 6mA
Recommended headphone impedance: 80-200Ohms
Dimensions (case): 4.43in x 2.38in x 1.22in // 113mm x 60mm x 31mm
Weight: 8.2oz // 233g

Box content:
- The famous POWERSYAP headphone amplifier
- 9-volt battery clip
- Adaptor for headphones (1/4 to 1/8 Inch)

Designed and handwired with ❤️ in the California and England.

Order yours today and experience the difference it can make in your audio setup!

If you have any questions, please drop me a message!